CNC Turning Service
Turned shafts, bushings and rotational components to an achievable tolerance of ±0.005 mm.
ISO 9001 | IATF 16949 | AS9100 certified production available on request
| Chuck capacity | 8 inch |
|---|---|
| Maximum length between centres | 550 mm |
| Live tooling | Available |
| Centre type | Mill-turn and turn-mill |
| General tolerance standard | ISO 2768-mK |
| Typical achievable tolerance | ±0.005 mm |
| Surface finish, turned and ground | Ra 0.4 |
| Materials | Alloy, stainless, non ferrous |
| Verification | CMM |
Achievable tolerance depends on feature size, material and measurement temperature. Those conditions are being confirmed for the figure above.
Design guidance
Length to diameter ratio
A long slender part deflects away from the tool and chatters. A length-to-diameter ratio above roughly eight to ten requires review of workpiece support. Support features or a split construction are considered during design.
Undercuts
Internal undercuts and deep recesses require grooving-tool access and an additional machining operation. Specify undercuts where required for circlips, seals or other functional features.
Thread specifications
Specify the thread by its standard designation and class of fit rather than by drawn geometry. That removes an interpretation step, and it lets us cut with a standard tool instead of single-point threading, which is faster and holds the same fit from part to part.
Materials
Aluminium
- Aluminium 6061-T6
- Aluminum 5251
- Aluminum 5754
- EN AW-2007
- Aluminum 7075-T7351
- Aluminum 6061-T651
- Aluminum 7075-T651
- Aluminum 6082-T651
- Aluminum 6060
- Aluminum 5052
- Aluminum 2017A
- Aluminum 2014
- Aluminum 6063
- Aluminum 7050
- Aluminum 2024-T351
- Aluminum MIC6
- Aluminum 7075-T6
- Aluminum 5083-H111
- Aluminum 6082
Carbon and mild steel
- Carbon steel C45
- Carbon Steel C35
- Carbon steel C40
- Mild steel S275JR
- Mild Steel S235JR
- Mild steel S355J2
- Mild steel A36
- Mild steel 1018
Titanium
- Titanium grade 5
- Titanium Grade 2
- Titanium Grade 1
ABS
- ABS
Nylon
- Nylon PA66 GF30 (30% glass filled)
- Nylon 6 Flame Retardant
- Nylon 6 30% Glass Filled
- Nylon 6
Polypropylene
- Polypropylene
- PP Homopolymer
- PP+GF(30%)
Polycarbonate
- Polycarbonate
Stainless steel
- Stainless Steel 420C
- Stainless Steel 316Ti
- Stainless steel 416
- Stainless steel 15-5
- Stainless steel 301
- Stainless steel 430
- Stainless steel 440C
- Stainless steel 420 (1.4028)
- Stainless steel 304/304L
- Stainless steel 2205 Duplex
- Stainless Steel 17-4 PH (Annealed state)
- Stainless steel 303
- Stainless steel 316/316L
Bronze
- Aluminium Bronze 954
- Bearing Bronze 932
- Phosphor Bronze CuSn12
- Phosphor Bronze CuSn5
- Phosphor Bronze CuSn6
- Phosphor Bronze CuSn8
Brass
- Brass Cz121
- Brass C360
Copper
- Beryllium Copper C17200
- Copper C101
- Copper C110
Alloy steel
- Alloy Steel 1.7227
- Alloy steel 1.7139
- Alloy steel 4130
- Alloy steel 1.6580
- Alloy steel 1.6582
- Alloy steel 1.7131
- Alloy steel 1215
- Alloy steel 4340
- Alloy steel 4140
Tool steel
- Tool Steel 1.2083
- Tool Steel P20
- Tool Steel O2
- Tool steel A3 - Annealed state
- Tool steel H13
- Tool steel S7
- Tool steel O1
- Tool steel A2
- Tool steel D2
Nickel alloy
- Inconel 625
- Inconel 718
Nickel-iron alloy
- Invar 36
Acetal
- Acetal Copolymer (POM-C) FDA
- Acetal Copolymer (POM-C) ESD
- Acetal Copolymer (POM-C)
- Acetal Homopolymer (POM-H)
PPSU
- PPSU
PEEK
- PEEK 30% Glass Filled
- PEEK
PTFE
- PTFE
Polyethylene
- UHMW-PE
- HDPE
Acrylic
- PMMA (Acrylic)
PET
- PET
Glass epoxy
- Garolite G-10
- FR4
PEI
- PEI Ultem 1000
- PEI Ultem 2300 30% Glass Filled
PVC
- PVC
Nonstandard materials are sourced to order. Availability is confirmed against the drawing, specification, quantity and process.
Request a quote
Quotations require a STEP, DXF or PDF drawing with the material, tolerance and finish specified.